ePrivacy and GPDR Cookie Consent by TermsFeed Generator Arduino Uno Rev 3 Starter Kit | OpenHAB - SmartHome | DomoticsDuino - Computer engineer, Smart Home / OpenHAB, Flight Sim and others...
OpenHAB - SmartHome (250 posts)

16/01/2015

Arduino Uno Rev 3 Starter Kit

by Marco Lamanna



After many research over the internet, we decided to buy on ebay the Arduino Uno Starter Kit.

We got it in a few days.


It contains:

  • 1 Arduino UNO R3 Board, made in Italy
  • 1 USB Cable 50cm
  • 1 Breadboard 830 points
  • 1 Display LCD 16X2 backlighted, Hitachi HD44780 driver
  • 2 Linear Pots 10Kohm
  • 2 Knobs
  • 1 9V Battery connector
  • 65 Jumpers
  • 10 Buttons
  • 1 Buzzer
  • 1 relay 5V 10A 250VA
  • 1 Temp Sensor LM35
  • 2 Transistor BC547
  • 1 Light Sensor
  • 10 Red LED
  • 10 Yellow LED
  • 10 Blue LED
  • 10 Green LED
  • 10 White LED
  • 1 RGB LED
  • 2 capacitors 4,7uF 100V
  • 5 Diode 1N4007
  • 10 Resistor 1Kohm
  • 10 Resistor 10Kohm
  • 10 Resistor 4,7Kohm
  • 20 Resistor 470ohm

I think we have enough things to begin experiments...

In the same shipping we received also:

RF 433 Mhz Transmitter and receiver modules



Ethernet shield based on W5100 chip with an sd card reader on board


an MQ-4 gas sensor


some RGB LED


Ok, don't waste our time...we are ready to begin some real experiments...